Wholesale High Performance Polycarboxylate Superplasticizer Ether For Building Using Admixture - Bt-301 Polycarboxylate Superplasticizer Slump Retention Type, 40% Solid Content – Gaoqiang
Wholesale High Performance Polycarboxylate Superplasticizer Ether For Building Using Admixture - Bt-301 Polycarboxylate Superplasticizer Slump Retention Type, 40% Solid Content – Gaoqiang Detail:
Product Feature
1.The slow-release mother liquor was faster release than that of BT-303 mother liquor. The release time is generally after 30min (according to the material that the release time is difference).
2.With super high slump performance, can let the concrete slump 2h without loss.
3.Low water reduction rate is generally not used alone, it needs to be combined with water reduction type mother liquor.
4.With low viscosity and thixotropy, it is more suitable for concrete with low water cement ratio.
Product Specification
Item | Standard |
Appearance | light yellow liquid |
Density(g*cm3) | 1.02-1.05 |
PH Value | 6-8 |
Solid Contents | 39%±1 |
cement fluidity mm( | 270mm/Hr |
Water reducing Rate | 5% |
bleeding rate ratio | 0% |
Pressure bleeding rate | 30% |
Air Content | 3% |
Slump retention mm (30min) | 200mm |
Slump retention mm (60min) | 170mm |
3D Compressive strength ratio | 190MPa |
7D Compressive strength ratio | 170MPa |
28D Compressive strength ratio | 150Mpa |
Application
1.Applicable to the configuration of early strength concrete, retarded concrete, precast concrete, cast-in-place concrete, flow concrete, self-compacting concrete, mass concrete, high-performance concrete and clear concrete, all kinds of industrial and civil buildings in the premix cast-in-place concrete, especially for low-grade commercial concrete.
2.It can be widely used in high-speed railways, nuclear power, water conservancy and hydro-power projects, subways, large Bridges, expressways, harbors and wharves and other national large and key projects.
3.Applicable to all kinds of industrial and civil construction and commercial concrete mixing stations.
How to use
1. This product is a colorless or light yellow liquid. Dosage: Usually, use 0-20% mother liquor with reducing water mother liquor, and mix other small materials to make water reducing agent. The dosage of water-reducing agent is generally 1% ~ 3% of the total weight of cementing materials.
2. Before use of this product or changing the type and batch of cement and gravel, it is necessary to carry out adaptability test with cement and gravel. According to the test, formulate the proportion of water reducing agent.
3. This product can be single used(Usually it could not use in single) It can be combined with water-reducing mother liquor and set retarding mother liquor to reduce concrete slump loss. Or compound with functional aids to get admixtures with retarder/early strength/antifreeze/pumping functions. The application method and conditions should be determined by testing and compounding technology.
4. This product can be used together with other kinds of admixtures such as early strength agent, air entrainment agent, retarder, etc., and should be tested before use. Do not mix with naphthalene series water reducer.
5. Concrete cement and mix ratio should be determined by test, When using, mixed and measured water should be added or added to the concrete mixer at the same time. Before using, the mixing test should be carried out to ensure the quality of the concrete.
6. When there are active admixtures such as fly ash and slag in the ratio of concrete, the amount of water-reducing agent should be calculated as the total amount of cementing materials.
Packing & Delivery
Package: 220kgs/drum, 24.5 tons/Flexitank ,1000kg/IBC or upon request.
Storage: Stored at ventilated dry warehouse of 2-35℃ and packaged intact, without unsealing, shelf life is one year. Protect from direct sunlight and freezing.
Safety Information
Detailed safety information, please check Material Safety Data Sheet.
Product detail pictures:
Related Product Guide:
The really abundant projects administration experiences and just one to one particular provider model make the substantial importance of organization communication and our easy understanding of your expectations for Wholesale High Performance Polycarboxylate Superplasticizer Ether For Building Using Admixture - Bt-301 Polycarboxylate Superplasticizer Slump Retention Type, 40% Solid Content – Gaoqiang , The product will supply to all over the world, such as: America, Malta, Egypt, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.
By Julie from Philippines - 2018.06.21 17:11
This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
By Alice from Georgia - 2017.05.21 12:31